RSS Alerts
The Labcut 150 sample preparation system

Related Stories

  • Novel silver nanoparticle gel shows promise for healing skin burns
    A novel antimicrobial silver-based gel using nanoparticles appears to offer an effective and safer alternative to conventional silver-based formulations used to treat burn wounds.
  • JSM-6510LV Scanning Electron Microscope
    The JSM-6510LV low vacuum SEM is a high-performance, low cost, scanning electron microscope for fast characterization and imaging of fine structures. One of a family of four SEM models that are widely-used in all research fields and industrial applications, the JSM-6510LV enables observation of specimens up to 150mm in diameter.
  • Webinar: Developments in Quantitative EDS Analysis, with a focus on light element and low energy peaks
    This can have a number of different causes, most common are element peak overlaps, and – nowadays of increasing importance – the necessity to analyze the peaks of elements at low energies.
  • A hard X-ray interferometer
    A novel type of hard X-ray interferometer employing a bilens system with two parallel arrays of compound refractive lenses has been developed by scientists from France and Russia. Under coherent illumination, the bilens generates two diffraction limited mutually coherent beams. When the beams overlap they produce an interference pattern with a fringe spacing ranging from tens of nanometres to tens of micrometres.
  • Casting a new light on chromophores
    Researchers from Harvard University in Massachusetts have devised a method to study non-fluorescent molecules using a technique called stimulated emission microscopy, an approach based upon a phenomenon first described by Albert Einstein in 1917 [Min et al., Nature (2009) 461, 1105].

News

Agar Scientific announces the new Labcut 150 low speed diamond saw

28 July 2010

Stansted, July 27th, 2010: Agar Scientific, a leading supplier of microscopy accessories and consumables

It announce the availability of the new Labcut 150 low speed diamond saw for sample preparation.

Agar Scientific offers a comprehensive range of sample preparation instrumentation in the knowledge that this is a vital step to produce exceptionally high quality sample specimens to enable investigations of the structure of metals, alloys, bone, composites, ceramics and soft materials. The latest of these is the new Labcut 150 low speed diamond saw.

The low speed diamond saw is well established in materials laboratories for cutting and sectioning a wide variety of small and delicate samples particularly when the material structure is not homogeneous. It gives a high quality cut surface without serious deformation and with minimum burr. The universal design uses thin diamond/CBN bonded wafering blades to cut fragile and soft samples that cannot be handled by high speed abrasive/diamond cutting machines. A range of sample holders have also been designed for this purpose including a rotating holder for round materials. The speed of the wafering blades can be varied between 0 and 1000rpm for optimum cutting conditions.

The Labcut 150 is ruggedly constructed but attractively styled with an aluminium frame and uses stainless steel components for stability and corrosion resistance. An inverter controls a 1/10HP motor driving the 1/2in/12.7mm diameter spindle using a toothed belt. The sample holders are held on a pivoting arm which is counterbalanced to give low loading conditions on the specimen. The arm is moved 25mm/1in with a micrometer adjustment so that the sample can be positioned for cutting. A number of weights are provided to give the required specimen loading on the rotating blade.

Wafering blades of 3in/75mm, 4in/100mm, 5in/125mm and 6in/150mm in diameter are available for the Labcut 150. The choice of a cutting blade depends on the application. Blades come in three types: resin bonded diamond in 2 different concentrations, CBN bonded wheels and abrasive blades with aluminium oxide or silicon carbide abrasives.

For further details of the Labcut 150 low speed diamond saw and Agar’s complete range of accessories and consumables for microscopy, please ask for a copy of their latest catalogue. To receive your free copy, please visit the Agar Website (www.agarscientific.com) and register today.
 

 

This article is featured in:
Biomaterials • Characterization • Nanotechnology • Polymers and soft materials • Surface science • Tools and Techniques

 

Comment on this article

You must be registered and logged in to leave a comment about this article.

Copyright © 2010
Elsevier Ltd. All rights reserved.
Terms & Conditions | Privacy | Website Design Working with water