This image illustrates how MIT engineers produced stronger composites by using a ‘forest’ of carbon nanotubes to stitch together individual layers of carbon fiber composites. Image courtesy of the researchers.The newest Airbus and Boeing passenger jets flying today are made primarily from advanced composite materials such as carbon fiber reinforced plastic. These are extremely light, durable materials that reduce the overall weight of the plane by as much as 20% compared to aluminum-bodied planes. Such lightweight airframes translate directly to fuel savings, a major advantage of advanced composites.
But composite materials are also surprisingly vulnerable: While aluminum can withstand relatively large impacts before cracking, the many layers in composites can break apart following relatively small impacts – a drawback that is considered the material's Achilles' heel.
Now aerospace engineers at Massachusetts Institute of Technology (MIT) have found a way to bond composite layers in such a way that the resulting material is substantially stronger and more resistant to damage than other advanced composites. Their results are published in a paper in Composites Science and Technology.
The researchers fastened the layers of composite materials together using carbon nanotubes – atom-thin rolls of carbon that, despite their microscopic stature, are incredibly strong. They embedded tiny ‘forests’ of these carbon nanotubes within a glue-like polymer matrix, then pressed the matrix between layers of carbon fiber composites. The nanotubes, resembling tiny, vertically-aligned stitches, worked themselves within the crevices of each composite layer, serving as a scaffold to hold the layers together.
In experiments to test the material's strength, the team found that, compared with existing composite materials, the stitched composites were 30% stronger, withstanding greater forces before breaking apart. Roberto Guzman, who led the work as an MIT postdoc in the Department of Aeronautics and Astronautics (AeroAstro), says the improvement may lead to stronger, lighter airplane parts – particularly those that require nails or bolts, which can crack conventional composites.
"More work needs to be done, but we are really positive that this will lead to stronger, lighter planes," says Guzman, who is now a researcher at the IMDEA Materials Institute in Spain. "That means a lot of fuel saved, which is great for the environment and for our pockets." The study's co-authors include AeroAstro professor Brian Wardle and researchers from the Swedish aerospace and defense company Saab AB.
Today's composite materials are composed of layers, or plies, of horizontal carbon fibers, held together by a polymer glue, which Wardle describes as "a very, very weak, problematic area". Methods for strengthening this glue region include Z-pinning and 3D weaving, which involve pinning or weaving bundles of carbon fibers through composite layers, similar to pushing nails through plywood, or thread through fabric.
"A stitch or nail is thousands of times bigger than carbon fibers," Wardle says. "So when you drive them through the composite, you break thousands of carbon fibers and damage the composite."
Carbon nanotubes, by contrast, are just 10nm in diameter – nearly a million times smaller than the carbon fibers.
"Size matters, because we're able to put these nanotubes in without disturbing the larger carbon fibers, and that's what maintains the composite's strength," Wardle says. "What helps us enhance strength is that carbon nanotubes have 1000 times more surface area than carbon fibers, which lets them bond better with the polymer matrix."
Guzman and Wardle came up with a technique for integrating a scaffold of carbon nanotubes within the polymer glue. They first grew a forest of vertically-aligned carbon nanotubes, following a procedure that Wardle's group previously developed. They then transferred the forest onto a sticky, uncured composite layer and repeated the process to generate a stack of 16 composite plies – a typical composite laminate makeup – with carbon nanotubes glued between each layer.
To test the material's strength, the team performed a tension-bearing test – a standard test used on aerospace parts – which involves putting a bolt through a hole in the composite and then ripping it out. While existing composites typically break under such tension, the team found that the stitched composites were stronger, able to withstand 30% more force before cracking.
The researchers also performed an open-hole compression test, applying force to squeeze the bolt hole shut. In that case, the stitched composite withstood 14% more force before breaking, compared to existing composites.
"The strength enhancements suggest this material will be more resistant to any type of damaging events or features," Wardle says. "And since the majority of the newest planes are more than 50% composite by weight, improving these state-of-the art composites has very positive implications for aircraft structural performance."
This story is adapted from material from MIT, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.