An image of the silicon-tin nanocomposite produced by high angle angular dark field imaging: the larger green particles are silicon and the smaller red particles are tin. Image: UC Riverside.Researchers at the University of California, Riverside (UCR) have created a new silicon-tin nanocomposite anode that could allow lithium-ion batteries to be charged and discharged many more times before they reach the end of their useful lives. These longer-lasting batteries could be used in everything from handheld electronic devices to electric vehicles.
The project was led by Lorenzo Mangolini, an associate professor of mechanical engineering and materials science and engineering in UCR's Bourns College of Engineering. A paper describing the research is published in Scientific Reports.
Lithium-ion batteries, the most popular rechargeable batteries in personal electronics, are composed of three main parts: an anode, a cathode and a lithium salt dissolved in an organic solvent. While graphite is the material of choice for most anodes, its performance is a limiting factor in making better batteries and expanding their applications.
Both silicon and tin have been investigated as novel high-performance alternatives for graphite anodes. In the current research, Mangolini's group showed for the first time that combining both materials into a single composite leads to dramatic improvements in battery performance. In addition to tripling the charge capacity offered by graphite, the silicon-tin nanocomposite is extremely stable over many charge-discharge cycles, essentially extending its useful life. These features, coupled with a simple manufacturing process, could help the expansion of lithium-ion batteries for use in next-generation electric vehicles.
"Lithium-ion batteries are growing in popularity for electric vehicles and aerospace applications, but there is a clear need to alleviate range anxiety – the fear that a vehicle won't have enough charge to reach its destination – before we will see large-scale adoption," said Mangolini. "Any technology that can help is welcome, as long as it is simple and scalable, and our technology meets both those criteria."
According to Mangolini, adding tin to the silicon, rather than another conductive material such as carbon black, circumvents the low conductivity of silicon without decreasing energy storage.
"The synergistic effects between these two materials lead to batteries that exceed the performance of each of the two components alone, an improvement that is a result of the high electrical conductivity and good energy storage capacity of tin," he explained. "This can be achieved with the addition of even minor amounts of tin, as small as 2% by weight."
This story is adapted from material from the University of California, Riverside, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.