The Japan Powder Metallurgy Association (JPMA) has appointed Tetsuya Ito, Hitachi Chemical Co Ltd, as its new president.
29 May 2013
Surface coatings specialist Hardide Coatings has appointed two senior business development managers to improve the uptake of its tungsten carbide-based coa
29 May 2013
Aluminium producer Novelis Inc garnered the main prizes at the first Platts Global Metals Awards, which recognises achievements in steel, metals and mining
29 May 2013
The EPMA has elected Philippe Gundermann, CEO of metal processer Aubert et Duval, as its new president.
29 May 2013
The Board of Höganäs has recommended Höganäs shareholders to accept a new offer from H Intressenter of SEK 325 per share in the company.
29 May 2013
Sumitomo Electric Sintered Alloy Ltd, a subsidiary of Sumitomo Electric Industries, Ltd, has founded a powder metallurgy engineering centre (PMEC) at its m
24 May 2013
Renishaw’s German subsidiary has acquired LBC Laser Bearbeitungs Center GmbH, Kornwestheim, Germany, a specialist in the additive manufacturing (AM) of too
22 May 2013
The UK’s Institution of Engineering and Technology (IET) has launched a worldwide search for the best engineering innovations for an awards programme.
22 May 2013
A group of tungsten refiners has established an initiative for industry members to demonstrate their compliance with the SEC’s ruling on conflict minerals.
22 May 2013
A newly released report by Lux Research shows 3D printing will grow to US$8.4 billion in 2025 – up from US$777 million in 2012, .
21 May 2013
Euromonitor International has published a series of reports covering the metal forming and powder metallurgy markets in a number of countries, including Ca
19 May 2013
Kenneth T Lane, currently senior vice president, Isocyanates Europe located in Brussels, Belgium, will become president of BASF’s catalysts division headqu
17 May 2013
H.C. Starck is to provide hot zones and furnace components fabricated from high performance technology metals for furnaces owned by ARC Energy.
16 May 2013
Molycorp reported consolidated net revenues of US$146.4 million during the first quarter of 2013, a 9% increase over the fourth quarter of 2012.
15 May 2013
Vanitec, a technical and scientific committee covering the mining, processing, manufacture, research and use of vanadium, has launched a new website intend
15 May 2013
The Obama Administration is investing US$200 million in competitions to create three new manufacturing innovation institutes in the fields of defence, ener
15 May 2013
The Timken Company has completed three capital investment projects totalling US$85 million.
15 May 2013
Kennametal Inc has acquired Comercializadora Emura SRL, a Bolivian company which specialises in the collection, testing, processing and exporting of tungst
15 May 2013
The EPMA has launched a new European additive manufacturing (AM) group, created to increase the awareness of the technology with a special focus on metal p
15 May 2013
Universal Stainless & Alloy Products Inc has signed a five-year contract with Rolls-Royce for the supply of specialty steel products. The contract will com
10 May 2013
The International Zinc Association (IZA) has appointed Martin Gagné to work with its technology and market development group.
9 May 2013
Research in China has published a report covering the market for molybdenum from 2012 to 2015.
8 May 2013
Tenova’s subsidiary LOI Thermprocess GmbH is to acquire Metall Technologie Holding (MTH), a supplier of vacuum and atmospheric furnaces.
8 May 2013
The MPIF plans to give out the PM Industry Landmark award for only the third time to an MIM orthodontic appliance.
8 May 2013
The Linde Group achieved an increase in group revenue by 10.3%to €3.985 billion, compared with €3.614 billion in the same period of 2012.
8 May 2013
General Moly announced that its cash balance on 31 March 2013 was approximately US$57 million, compared to US$68 million on 31 December 2012.
8 May 2013
Universal Stainless & Alloy Products Inc reported Q1 2013 sales of US$49.1 million compared with US$74.6 million in the first quarter of 2012.
8 May 2013
Global automotive industry is likely to surpass US$2 trillion by 2017, an increase by over 7% per year.
8 May 2013
According to the Yorkshire Post, Atomising Systems (ASL) and MEC Electrical Contracting have won a major engineering contract in the Far East for the compa
6 May 2013
Carpenter Technology has completed a formal supply agreement to provide Rolls-Royce with materials for making of jet engine components.
2 May 2013
Kennametal Q3 sales were US$655 million, compared with US$696 million in the same quarter last year, a 6% decrease.
1 May 2013
Carpenter Technology has reported net income of US$32.9 million for Q3 ended 31 March 2013, compared to US$33 million in Q3 in the previous year.
1 May 2013
GE Aviation has made plans to mass-produce a fuel nozzle for a new aircraft engine using laser sintered cobalt-chromium powder.
1 May 2013
Chrysler Group LLC is putting US$19.6 million in its Toledo Machining Plant in Perrysburg, Ohio, USA.
1 May 2013
Market information provider the ARC Advisory Group has published a strategy report covering trends in additive manufacturing (AM).
1 May 2013
According to Umicore, its revenues were down 2% in the first quarter of 2013 due to the “adverse market conditions” in many of its end markets.
1 May 2013