Our website uses cookies

Cookies enable us to provide the best experience possible and help us understand how visitors use our website. By browsing Materials Today, you agree to our use of cookies.

Okay, I understand Learn more
Metal Powder Report CHANGE TOPIC

Metal Powder news, March 2016

Ceramics specialist focuses on Internet of Things

Ceramics manufacturer Kyocera Corporation plans to expand its Internet of Things (IoT) business.

Applied Graphene Materials has announced its interim results for the period ended 31 January 2016.

Umicore says that it reached 7% revenue growth in 2015, and generated an average return on capital of 15%.

The Society of Motor Manufacturers & Traders reports that 230,868 engines were manufactured in the UK in February, up 11.1% on the same month last year.

Cambridge researchers have shown that particle size isn’t the only concern when it comes to the risks posed by volcanic ashes.

The MPIF will announce Hideshi Miura and Cesar Molins as APMI Fellows during POWDERMET2016.

The Metal Powder Industries Federation (MPIF) has launched a new website design.

The Johns Hopkins University APL has established a center of excellence to guide major advances in additive manufacturing (AM).

The HORIZON 3D printing £13.4 million research and development program has had its fourth project meeting.

Members of the LIGHT additive manufacturing (AM) project consortium in the UK plan to share their findings from the two-year project at an event in April.

Siemens has reported a strong Q1 2016 following major contract wins in Europe and Africa.

Metalysis has received an investment of £20 million to develop its metal powder production technology for commercial production.

Penn State researchers have released a roadmap to accelerate the design and application of AM materials over the next 10 years.

European Commission EUR 3 million challenge for materials solutions to reduce concentration of particulates in urban areas

HiETA Technologies has received £1.7 million to lead a project developing new lighter vehicle components made from advanced aluminum alloys.

GKN Sinter Metals has updated its company website. The site now has a simplified, functional navigation as well as new content, the company says.

3D printing specialist Fabrisonic has published a new whitepaper.

Aerojet Rocketdyne has tested a rocket engine featuring a core main injector built using additive manufacturing (AM) technology.

Federal-Mogul has published net sales of US$7,419 million, compared to US$7,317 million in 2014.

Global medical technology business Smith & Nephew has developed a 3D printed titanium implant which could replace other porous implants.

The Asia-Pacific region is the fastest-growing metal powder market, with the highest CAGR of 5.01%, says a new report.

Cooksongold has introduced platinum metal powder at the Baselworld Jewellery Fair, taking place from the 17–24 March 2016 in Basel, Switzerland.

SKF has signed an agreement to divest its fly-by-wire business to Lord Corporation.

GKN reports that its sales in 2015 increased by 2% organically from £7,456 million in 2014 to £7,689 million.

America Makes, the National Additive Manufacturing Innovation Institute, is now calling for additive manufacturing (AM) project bids.

Composites Germany has opened a call for presentations for the second International Composites Congress (ICC).

Abbott Furnace Company reports that that Jose M. Medina has tendered his resignation as president of the company.

Quintus Technologies reports that it will supply two additional hot isostatic presses (HIPs) to China’s Anhui Yingliu Group.

UK automotive engine production rose 1.5% in January 2016 compared with the same month last year, according to the SMMT.

End user demand for molybdenum could increase by an average of 3.6% in the period to 2024, reports the IMOA.

William F Jandeska Jr has been selected to receive the Kempton H Roll PM Lifetime Achievement Award.

Atomising Systems Limited (ASL), based in the UK, has undertaken R&D work on its gas atomizer to meet growing demand for ultrafine gas atomized powders.

SKF has announced the following changes to its group management.

LPW Technology will be showing its Total Powder Manufacturing (TPM) additive manufacturing (AM) system at TCT Asia.

Phillips-Medisize Corporation announced the completion of its metal injection molding (MIM) facility expansion.

Carpenter has announced plans to relocate its corporate headquarters from Wyomissing, PA, to the city of Philadelphia.

The Chinese government will be able to complete a major consolidation of the country's rare earth industry by the middle of this year.

Nano Dimension Technologies is developing 3D printing methods for a nanoparticle nickel material.

The CPI is building a high energy ball-mill (HEBM) pilot plant for the production and validation of nanostructured powders.

Kennametal Inc has been recognized as one of 2016's World's Most Ethical Companies.

Renishaw has announced plans to take on 45 new apprentices this year, according to the Western Daily Press website.

Sandvik has joined the Coalition for Energy-Efficient Comminution (CEEC).

Höganäs AB has appointed Polypaz, based in Turkey, to cover iron powder and high alloy metal powder.

Renishaw plans to introduce its new RenAM 500M additive manufacturing system at the MACH trade show.

Understanding the complex physics behind AM is a vital step in developing the technology, according to LLNL researchers.

Sigma Labs has entered into a technology development agreement with 3DSIM.

Italeaf has created a new company for the production of metal powder and new alloys.

Jude Pfingstler has been named one of the Top 100 Business Leaders in Central Pennsylvania, USA for 2015.

News archive…

Connect with us
What’s coming up…
23
Apr ’21

 
15
Dec ’20

 
15
Dec ’20