First field-effect transistor made from solution processed colloidal nanoparticles.
28 June 2016Cordelia Sealy
PM processing giant Wall Colmonoy has appointed Nicholas W Clark as president.
28 June 2016
PowderMet2016, co-located with AMPM2016, gathered in Boston last week for another successful event, its organizers report.
28 June 2016
Arevo, a specialist in 3D printing of composite materials for production applications, is to receive US$7 million funding
28 June 2016
The EPMA says that its additive manufacturing (AM) seminar, which took place this April in Bremen, Germany, was a success.
27 June 2016
SKF has signed contracts worth over SEK 1 billion with Rolls-Royce.
27 June 2016
GE Aviation has invested more than US$200 million in two factories to mass-produce silicon carbide (SiC) materials.
24 June 2016
Anglia Ruskin University in the UK has created the UK’s only dedicated master’s degree in additive manufacturing (AM).
24 June 2016
Hexcel Corp and Oxford Performance Materials have formed a partnership.
23 June 2016
Alpha Sintered Metals has acquired metal injection molding specialist Precision Made Products, headquartered in Ohio, USA.
23 June 2016
Renishaw, the global engineering technologies company, is opening a new additive manufacturing (AM) center in Pune, India.
22 June 2016
Powder metallurgy (PM) industry leader P Ulf Gummeson has written a book the history of American PM.
22 June 2016
Isamu Kikuchi has been appointed the new president of the Japanese Powder Metallurgy Association (JPMA).
21 June 2016
HIP supplier Quintus Technologies has supplied a press to AM specialist Sintavia, LLC.
20 June 2016
The Society of Motor Manufacturers and Traders (SMMT) says that staying in the EU is best for its business.
20 June 2016
Metal coating specialist PPG has reached a definitive agreement to acquire MetoKote Corporation.
17 June 2016
Additive Industries has sold its fifth MetalFAB1 system to GKN Powder Metallurgy.
17 June 2016
America Makes and Michigan Technological University have developed a new open-source, web-based 3D controller.
16 June 2016
Additive Orthopaedics LLC says that it has received FDA 510(k) clearance for its 3D printed titanium digital fusion implant.
15 June 2016
Graphene 3D Labs Inc has appointed A Paul Gill to join the board of directors.
15 June 2016
Kegelmann and Concept Laser have formed a partnership to improve series-production quality in 3D printing.
14 June 2016
Chemtrix BV and DSM Chemical Technology have signed an agreement to develop 3D printed metal continuous flow reactors.
14 June 2016
SKF has announced the consolidation of its manufacturing facilities in North America.
13 June 2016
America Makes has appointed Roger Narayan PhD as its new Fellow.
13 June 2016
Register for the workshop here.
13 June 2016
Global production of molybdenum slowed in 2015, according to figures from the International Molybdenum Association (IMOA).
10 June 2016
GKN Aerospace has won contracts from Airbus Safran Launchers to develop and manufacture rocket engine sub-systems.
10 June 2016
New aluminum-cerium alloys are not just easy to work with and heat tolerant, but could also boost US production of rare earth elements.
10 June 2016
The SME has announced the winners of awards presented at the RAPID additive manufacturing (AM) Conference & Exposition.
9 June 2016
Oak Ridge National Laboratory and Cincinnati Inc have signed a nonexclusive licensing agreement on ORNL patents related to large-scale AM.
9 June 2016
The iron powder market in North America is expected to reach 563,000 metric tons in volume by 2020, boosted by automakers.
8 June 2016
Researchers at Lawrence Livermore National Laboratory have discovered the reason for the porosity found in parts produced by AM.
8 June 2016
NetComposites has announced that Andrew Mafeld of Connectra Global will be the keynote speaker at Composites Innovation 2016.
7 June 2016
The US IHEA will run the 47th Combustion Seminar, its Safety Standards Seminar, and the revised Induction Seminar, in Covington, KY, this autumn.
7 June 2016
The Powder Coating Institute in the US reports that its next summit takes place from 4-5 October 2016, in Columbus, Ohio.
6 June 2016
Composites company Hexcel Corporation has invested in Oxford Performance Materials (OPM).
6 June 2016
A novel ionic liquid can transform into a solid polymer when exposed to light and then return to liquid form when heated.
3 June 2016
SKF has signed an agreement to divest its Kaydon velocity control business to Stabilus, a global supplier to the automotive and industrial markets.
2 June 2016
Haydale and Flowtite have formed a new joint development agreement (JDA) to develop GRP pipeline products.
2 June 2016
Umicore reports that its revenues increased by 1% in the first quarter of 2016.
2 June 2016
Concept Laser says that its Mlab Cusing R 3D printer was used to 3D print a titanium replacement beak for a wild macaw.
2 June 2016
Dr Hans J Langer, founder and CEO of EOS GmbH, has received the SME Additive Manufacturing Industry Achievement Award.
1 June 2016
Umicore plans to increase its capacity for NMC (nickel manganese cobalt) cathode materials.
1 June 2016