A scanning electron microscope image of an iron pyrite metasurface created at Rice University to test its ability to transcend the Moss rule, which describes a trade-off between a material’s optical absorption and how it refracts light. Image: The Naik Lab/Rice University.If you’re going to break a rule with style, make sure everybody sees it. That’s the mantra of engineers at Rice University who hope to improve screens for virtual reality, 3D displays and optical technologies in general.
A team led by Gururaj Naik, an associate professor of electrical and computer engineering at Rice’s George R. Brown School of Engineering, has found a way to manipulate light at the nanoscale that breaks the Moss rule, which describes a trade-off between a material’s optical absorption and how it refracts light.
Apparently, it’s more like a guideline than an actual rule, because a number of ‘super-Mossian’ semiconductors do exist. Fool’s gold, aka iron pyrite, is one of them.
In a paper in Advanced Optical Materials, Naik and his team report that iron pyrite works particularly well as a nanophotonic material, and could lead to better and thinner displays for wearable devices. More important is that they’ve now established a method for finding materials that surpass the Moss rule, and offer useful light-handling properties for displays and sensing applications.
“In optics, we’re still limited to a very few materials,” Naik said. “Our periodic table is really small. But there are so many materials that are simply unknown, just because we haven't developed any insight on how to find them.
“That’s what we wanted to show,” he continued. “There are physics that can be applied here to shortlist the materials, and then help us look for those that can get us to whatever the industrial needs are. Let’s say I want to design an LED or a waveguide operating at a given wavelength, say 1.5µm. For this wavelength, I want the smallest possible waveguide, which has the smallest loss, meaning that can confine light the best.”
Choosing a material with the highest possible refractive index at that wavelength would normally guarantee success, according to Moss. “That’s generally the requirement for all optical devices at the nanoscale,” explained Naik. “The materials must have a bandgap slightly above the wavelength of interest, because that’s where we begin to see less light getting through.
“Silicon has a refractive index of about 3.4, and is the gold standard. But we started asking if we could go beyond silicon to an index of 5 or 10.”
That prompted their search for other optical options, and led them to develop their formula to identify super-Mossian dielectrics. “In this work, we give people a recipe that can be applied to the publicly available database of materials to identify them,” Naik said.
The researchers settled on experiments with iron pyrite after applying their theory to a database of 1056 compounds, searching in three bandgap ranges for those with the highest refractive indices. Three compounds along with pyrite were identified as super-Mossian candidates, but pyrite’s low cost and long use in photovoltaic and catalytic applications made it the best choice for their experiments.
“Fool’s gold has traditionally been studied in astrophysics because it’s commonly found in interstellar debris,” Naik said. “But in the context of optics, it’s little-known.”
He noted that iron pyrite has been studied for use in solar cells. “In that context, they showed optical properties in the visible wavelengths, where it’s really lossy,” he said. “But that was a clue for us, because when something is extremely lossy in the visible frequencies, it’s likely going to have a very high refractive index in the near-infrared.”
So the lab made optical-grade iron pyrite films. Tests of these films revealed a refractive index of 4.37 with a band gap of 1.03 electron volts, surpassing the performance predicted by the Moss rule by about 40%.
That’s great, Naik said, but the search protocol could – and likely will – find materials that are even better: “There are many candidates, some of which haven’t even been made.”
This story is adapted from material from Rice University, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.